Korenix JetNet 6910G-M12 Series, Руководство пользователя

Страница: 72 / 146

68
4.5.10 Command Lines
Feature Command Line
Global
Enable
Switch(config)# spanning-tree enable
Disable Switch (config)# spanning-tree disable
Mode (Choose the
Spanning Tree
mode) Switch(config)# spanning-tree mode
rst the rapid spanning-tree protocol (802.1w)
stp the spanning-tree prtotcol (802.1d)
mst the multiple spanning-tree protocol (802.1s)
Bridge Priority Switch(config)# spanning-tree priority
<0-61440> valid range is 0 to 61440 in multiple of 4096
Switch(config)# spanning-tree priority 4096
Bridge Times Switch(config)# spanning-tree bridge-times (forward Delay)
(max-age) (Hello Time)
Switch(config)# spanning-tree bridge-times 15 20 2
This command allows you configure all the timing in one time.
Forward Delay Switch(config)# spanning-tree forward-time
<4-30> Valid range is 4~30 seconds
Switch(config)# spanning-tree forward-time 15
Max Age Switch(config)# spanning-tree max-age
<6-40> Valid range is 6~40 seconds
Switch(config)# spanning-tree max-age 20
Hello Time Switch(config)# spanning-tree hello-time
<1-10> Valid range is 1~10 seconds
Switch(config)# spanning-tree hello-time 2
MSTP
Enter the MSTP
Configuration Tree Switch(config)# spanning-tree mst
MSTMAP the mst instance number or range
configuration enter mst configuration mode
forward-time the forwa68oreneay time
hello-time the hello time
max-age the message maximum age time
max-hops the maximum hops
sync sync port state of exist vlan entry
Switch(config)# spanning-tree mst configuration
Switch(config)# spanning-tree mst configuration
Switch(config-mst)#
abort exit current mode and discard all changes
end exit current mode, change to enable mode and
apply all changes
exit exit current mode and apply all changes
instance the mst instance
list Print command list
name the name of mst region
no Negate a command or set its defaults
quit exit current mode and apply all changes
revision the revision of mst region
show show mst configuration
Region
Configuration Region Name:
Switch(config-mst)# name
NAME the name string