78
4.6.2
VLAN Configuration
In this page, administrator can assign Management VLAN, create the static VLAN, and
assign the Egress rule for the member ports of the VLAN.
Figure 4.6.2.1 Web UI of the VLAN Configuration.
Management VLAN ID:
The switch supports management VLAN. The management
VLAN ID is the VLAN ID of the CPU interface of the control plane in the switch so that
only member ports of the management VLAN can ping and access the switch.
The
default management VLAN ID is
1
.
Static VLAN: a VLAN ID and VLAN
Name for new VLAN here.
VLAN ID is used by the switch to identify
different VLANs. Valid VLAN ID is
between 1 and 4094. 1 is the default
VLAN.
VLAN Name is a reference for network
administrator to identify different VLANs.
The available character is 12 for you to input. For VLAN name without setting or blank, the
system will automatically assign VLAN name for the VLAN. The rule is VLAN (VLAN ID).
Figure 4.6.2.2 The steps to create a new VLAN: Type VLAN ID and NAME, and press Add
to create a new VLAN. Then the new VLAN in the Static VLAN Configuration table can be
displayed. Refer to Figure 4.6.2.3
After VLAN is created, the status of the VLAN remains in Unused until further ports are
added to the VLAN.
Caution: Before changing the management VLAN ID via Web and Telnet, remember that
the port attached by the administrator should be the member port of the management
VLAN; otherwise the administrator can’t access the switch via the network.
Note: JetNet 6910G-M12 supports max 255 groups of VLAN.
Static VLAN Configuration
You can see the created VLANs and specify the egress (outgoing) port rule to be
Содержание JetNet 6910G-M12 Series
Страница 5: ...1 5 4 About Korenix 141...