Korenix JetNet 6910G-M12 Series, Руководство пользователя

Страница: 59 / 146

55
Examples EX 1: Set 802.3af powring mode
Switch(config)# poe powering-mode 802.3af
EX 2:
Set forced powering mode
Switch(config)# poe powering-mode forced
Syntax poe powering-mode 802.3at 2-event/lldp
Parameters 2-event: deliver power if and only if the attached PD comply
with IEEE 802.3at physical layer classification
lldp: deliver power if and only if the attached PD comply with
IEEE 802.3at data link layer classification
Command Mode Interface mode
Description Set the Powering mode of PoE
Examples EX 1: Set 802.3at 2-event powering mode
Switch(config)# poe powering-mode 802.3at 2-event
EX 2:
Set 802.3at lldpforced powering mode
Switch(config)# poe powering-mode 802.3at lldp
Syntax poe control-mode user/schedule
Parameters user: user mode
schedule: schedule mode
Command Mode Interface mode
Description Set the control mode of port
Examples Set PoE port 2 to user mode.
E X 1:
Switch(config)# interface fa2
Switch(config-if)# poe control-mode user
Set PoE port 2 to schedule mode.
EX 2:
Switch(config-if)# poe control-mode schedule
Syntax poe user enable/disable
Parameters ena ble: enable port in user mode
disa ble: disable port in user mode
Command Mode Interface mode
Description Enable/Disable the PoE of the port in user mode.
If in schedule mode, it will come into affect when the control
mode changes to user mode.
Examples To enable the PoE function in user mode
Switch(config-if)# poe user enable
To disable the PoE function in user mode
Switch(config-if)# poe user disable
Syntax poe type TYPE
Parameters T PE : port type string with max 20 characters
Command Mode Interface mode
Description Set the port type string.
Examples Set the type string to
“IPCam-1.
Switch(config-if)# poe type IPCam-1
Syntax poe budget [POWER]
Parameters PO ER : 0.4
– 32
Command Mode Interface mode
Description Set the port budget.
The max budget is different between 802.3af, 802,3at and