20
Global Configuration Mode: Press configure terminal in privileged EXEC mode.
Adminstrator can then enter global configuration mode. In global configuration mode,
administrator can configure all the features that the system provides.
Type interface IFNAME/VLAN to enter interface configuration mode, exit to leave. ? to
see the command list.
Available command lists of global configuration mode.
(Port) Interface Configuration: Press interface IFNAME in global configuration mode.
Administrator can then enter interface configuration mode. In this mode, administrator can
configure port settings.
The port interface name of the fast Ethernet port is fa<Port Number>. Ex: Fast Ethernet
Port 1 fa1, fast Ethernet port 7 is fa7.
The port interface name of the Gigabit Ethernet port is gi<Port Number>. Ex: Gigabit
Ethernet Port 8 is gi8, Gigabit Ethernet Port 17 is gi17. Even you apply fixed 100M speed
to the Gigabit Ethernet port, the port interface name is still gi<Port Number>.
Types interface name accordingly for going to certain interface configuration mode.
Type exit to leave.
Type ? to see the command list
Switch# configure terminal
Switch(config)#
access-list Add an access list entry
administrator Administrator account setting
clock Configure time-of-day clock
default Set a command to its defaults
dot1x 802.1x port-based authentication for the switch
end End current mode and change to enable mode
erps Ethernet Ring Protection Switching (ITU-T G.8032)
ethernet-ip Ethernet/IP Protocol
exit Exit current mode and down to previous mode
gmrp GMRP protocol
gvrp GARP VLAN Registration Protocol
hostname Set system's network name
interface Select an interface to configure
ip Global IP configuration subcommands
ipv6 IP information
lacp Link Aggregation Control Protocol
list Print command list
lldp Link Layer Discovery Protocol
log Logging control
mac Global MAC configuration subcommands
mac-address-table mac address table
mirror Port mirroring
modbus Modbus TCP Slave
multiple-super-ring Configure Multiple Super Ring
no Negate a command or set its defaults
ntp Configure NTP
ptp IEEE1588 Precision Time Protocol
qos Quality of Service (QoS)
relay relay output type information
service System service
sfp Small form-factor pluggable
smtp-server SMTP server configuration
snmp-server SNMP server
spanning-tree spanning tree algorithm
system System setting
trunk Trunk group configuration
vlan Virtual LAN
warning-event Warning event selection
write-config Specify config files to write to
Содержание JetNet 6910G-M12 Series
Страница 5: ...1 5 4 About Korenix 141...
