Konifera BW31000LED, Руководство по сборке

Страница: 60 / 80

- 60 -
Setting of travel limit for the sun shade
Warning :
1. Attention:Well finish the setting program already for all electric items,final client no need
adjust the motor again.
2. The user can adjust the limit of one direction at one time, do not adjust two knobs at the
same time.
3. Do not turn knobs fiercely, please check the limit with remote control per revolute about
half cycle, and check if the setting you satisfied.
The motor should be reset only bellow situation happened:
1). The front bar can't fold completely
White:
Sun shade closing
limit setting
2). The fabric isn't smooth after open the awning
Red:
Sun shade projection
limit setting
Warning: When the front bar
touches the end cap shown
in the image, do not try to
bring them closer.
Otherwise, the product may
be damaged.
Up
Down
Up
10
Setting the extension and retraction limits
Warning:
1. Caution: The extension and retraction limits are set and do not have to be adjusted by the user.
2. If readjustment is required, then either extension or retraction must be adjusted one at a time,
as the remote control must not be operated at the same time as extension and retraction.
3. Do not force the adjustment knobs. Check your setting with the remote control. The retraction
setting is correct if the awning is closed and the motor has audibly switched off. The extension
setting is correct if the awning fabric does not sag (see figure) and the motor has audibly
switched off.
The motor should only be reset in the following situations:
1). The front pole is not fully retracted
White:
Retracting the awning
limits the setting
Front pole
Warning: If the front pole touches the end cap as
shown in the figure, do not try to bring them closer
together. Otherwise you could damage the product.
2). The fabric sags when the awning is extended
Red:
Projection of
the awning limits the
setting
Up Down
GB