- 58 -
Connection
CAUTION, risk of electric shock.
The power connection of the awning shall
be performed by a qualified technician only. To be installed under effective
regulation.
●
Make sure that the power supply corresponds to the appliance's specifications (
Technical
data
). Interrupt power supply. Connect the cables in the terminal as follows.
Colour of cable
Yellow/green
Blue
Brown
From
To
Awning
Earth
Neutral
Live
Operation instructions
Remote control
Instructions of use of the motor with the remote control.
The Dooya motor, with integrated radio receiver (433MHz) must be programmed with the
DC90 transmitter. Range of this transmitter: Open 200m, two walls 30m
Up
Stop
Down
P2
●
Mounting the remote control's wall mount base:
Locate a suitable place indoors and drill two holes for
attaching the base (23). Use a cable detector prior to drilling to prevent damaging electric cables or water
pipes.
Insert the two small dowels into the drill holes. Insert the two screws into the dowels and mount the base to
the wall.
Function
Press button
Stop
Up
Down
Retract / close the awing
stop opening/closing process
extract / open the awning
An indicator light (24) is flashing when one of the buttons is pressed. When power off, you
can use hand crank to open or close the awning.
Awning users are not allowed to operate the product more than 2 rounds, in that case,
motor overheat protection status will be automatically started. In that case, pressing on the
remote control cannot run the awning. Users need to wait for about half an hour for any
manipulation.
Pressing “stop” button on remote control when the awning completely opened or closed.
P2
P2
LED light
Switch
Turn on or turn off the LED light
Neutre
Phase
Connection at
the motor
Motor
Power source
8
8
Connection
CAUTION, danger of electric shock!
Only a qualified technician should connect the awning to
the power supply. Installation in accordance with applicable regulations.
• Ensure that the power supply meets the specifications of the device (technical data). Turn off the
power supply. Connect the cables in the terminal as follows:
Connect the motor to
the phase
Blue
Brown
Yellow/Green
N = Neutral
L = Phase
PE
Power source
Color of wire
Yellow/Green
Blue
Brown
Awning
From
To
Earth
Neutral
Live
Connection
CAUTION, risk of electric shock.
The power connection of the awning shall
be performed by a qualified technician only. To be installed under effective
regulation.
Make sure that the power supply corresponds to the appliance's specifications (
Technical
data
). Interrupt power supply. Connect the cables in the terminal as follows.
Colour of cable
Yellow/green
Blue
Brown
From
To
Awning
Earth
Neutral
Live
Operation instructions
Remote control
Instructions of use of the motor with the remote control.
The Dooya motor, with integrated radio receiver (433MHz) must be programmed with the
DC90 transmitter. Range of this transmitter: Open 200m, two walls 30m
●
Mounting the remote control's wall mount base:
Locate a suitable place indoors and drill two holes for
attaching the base (23). Use a cable detector prior to drilling to prevent damaging electric cables or water
pipes.
Insert the two small dowels into the drill holes. Insert the two screws into the dowels and mount the base to
the wall.
Function
Press button
Stop
Up
Down
Retract / close the awing
stop opening/closing process
extract / open the awning
An indicator light (24) is flashing when one of the buttons is pressed. When power off, you
can use hand crank to open or close the awning.
Awning users are not allowed to operate the product more than 2 rounds, in that case,
motor overheat protection status will be automatically started. In that case, pressing on the
emote control cannot run the awning. Users need to wait for about half an hour for any
manipulation.
Pressing “stop” button on remote control when the awning completely opened or closed.
Switch
Turn on or turn off the LED light
Neutre
Phase
Connection at
the motor
Motor
Power source
88
Awning users are not allowed to operate the product more than twice, otherwise the overheating
protection function will be automatically activated. In this case, pressing on the remote control will
not trigger the operation of the awning. Users must wait half an hour before the awning will work.
When the awning is fully extended or retracted, press the stop button on the remote control.
Operating instructions
Remote control
Instructions for using the motor with the remote control.
The Dooya motor with integrated radio receiver (433 MHz) must be programmed with the DC90
transmitter. Transmission range of the transmitter: Open 200m, two walls 30m
● Mounting the remote control with wall base station: Select the appropriate location inside the
room and drill two holes to attach the base (23). Use a cable detector before drilling to prevent
damage to electrical cables or water pipes.
Insert the two small wall plugs into the drilled holes. Insert the two screws into the wall plugs and
mount the base to the wall.
Press the button
Up
Stop
Down
Switch
Function
Retract the awning
Stop extension/retraction
Extend the awning
Turn the LED lamp on and off
GB
Содержание BW31000LED
