Konica Minolta bizhub PRESS 1052, Руководство пользователя

Страница: 490 / 540

bizhub PRESS 1250/1052 11-31
11.11 Troubleshooting Tips 11
11.11 Troubleshooting Tips
Case Checkpoint Remedy
M
ain B
ody
The machine does
not operate even if
the
sub power
switch is turned
ON.
Is the power plug firmly inserted in
wall socket? Firmly insert the power plug in wall
socket.
Is the main power switch turned
ON?
Keep the main power switch turned
ON usually.
Is the Power Save LED on? The machine cannot be turned on
due to the Weekly Timer function.
Operate Timer Interrupt (see the
POD Administrator's Reference), or
consult your administrator.
Is the screen for user/account au-
thentication displayed? Enter required information for us-
er/account authentication (see the
POD Administrator's Reference).
Copying does not
begin. Is the front/left side door of the ma-
chine open? Securely close the front/left side
door of the machine.
Is there appropriate paper size in a
tray? Load the paper size selected for the
original.
Is the print quantity set to [0]? Enter an appropriate number for
print quantity.
Is the front door of finisher/folding
unit/large capacity stacker open? Securely close the finisher front
door, folding unit front door, and
large capacity stacker front door.
Is the message to inform that the
waste toner box is full displayed in
the message area? Or, is the Waste
Toner Box indicator on the Machine
Screen lighting up in red? Open the main body front door/left
side door to replace the waste toner
box.
Copy image is not
clean or shows
spots. Is the original glass clean? Wipe the original glass , if neces-
sary.
Is the original document clean? Erase spots on the original, if any.
Is the density adjustment made
properly? Manually specify copy density to
select an appropriate exposure lev-
el.
If further adjustment is required, see
Section 6.
Copy image is too
light. Is the density adjustment made
properly? Manually specify copy density to
select an appropriate exposure lev-
el.
If further adjustment is required, see
Section 6.
Is the message [Please add toner]
displayed on the Machine Screen? Add toner.
Copy quality is
poor. Is paper damp? Replace the paper, if necessary.
Magnification can-
not be changed. Is the Reduce & Shift function se-
lected? Release the Reduce & Shift mode.
Copying does not
resume after mis-
handled paper is
removed. Is any mishandled paper left? Check machine diagram on the
screen for additional indications of
mishandled paper.
2->1 or 2->2 mode
cannot be select-
ed. Is ADF open? Fully close ADF .