Konica Minolta bizhub PRESS 1052, Руководство пользователя

Страница: 440 / 540

bizhub PRESS 1250/1052 10-2
10.1 Making Sample Set for Checking Results: Proof Copy 10
10 Advanced Information
10.1 Making Sample Set for Checking Results: Proof Copy
Use Proof Copy to scan the original and produce a single set or the first sheet of sample copy before making
multiple copies. This is a convenient and cost effective way for making a large amount of copies.
d
Reference
You can select whether to output a set of all pages or to print only the first sheet by pressing Proof Copy on
the control panel .
Also, you can set the machine to allow the selection to print a set of all pages or only the first sheet when
making proof copy from the Mode Check Screen.
For details, see Section 7 of the POD Administrator's Reference.
0
If original count exceeds 100 or the original glass is desired for scanning the original, use Separate
Scan mode to start the operation by scanning all the original.
0
The proof-copied job can be stored as a suspended job without being printed.
1
Position the original.
2
Make the desired job selections from the Copy Screen.
%
If Separate Scan mode is selected, press Start on the control panel to scan all the original before
proceeding to step 3.
3
Press Proof Copy on the control panel .
A set or the first sheet of sample copy will be output while scan-
ning the original.
When using the Separate Scan mode and the original has al-
ready been scanned, the machine outputs a sample copy im-
mediately.
The Mode Check Screen will be displayed.
4
Review the job settings.
%
Depending on the selected output settings or application functions, scroll keys appear at the bottom
of each area. Press the keys to check all the settings.
If no setting change is desired, proceed to step 7.