Konica Minolta 7115F, Инструкция по эксплуатации

Страница: 70 / 327

3 Before Making Copies or Faxing
3-40 Konica 7115F/7118F
Note:
G
Be sure to adhere to the paper specitications for each tray (i.e. paper
type, paper size and capacity). Otherwise, a paper misfeed can occur.
G When loading paper measured in inch (Letter, Legal etc.) in the tray,
change the “INCH/METRIC” function in the Initial Set mode. (p. 9-13)
G
When loading non-standard size paper in the 1st Tray, select the
appropriate setting using the “TRAY1 PAPER” function in the Initial
Set mode. (p. 9-14)
G When loading a non-standard size paper in the Manual Bypass Tray
or Multiple Bypass Tray, select paper size setting “CUSTOM” before
making copies, and then enter the corresponding paper size. (p. 4-19)
G If cards, OHP transparencies, or postcards are loaded into the 1st
Tray, select the appropriate setting using the “TRAY1 PAPER”
function in the Initial Set mode. (p. 9-14)
G If cards, OHP transparencies, or postcards are loaded into the Manual
Bypass Tray or Multiple Bypass Tray, select the appropriate paper
type before making copies. (p. 4-15 or p. 4-17)
G
If you do not want automatic paper size/paper source selection to be
activated when recycled paper is loaded into a paper tray, select the
appropriate setting using the “AUTO SELECT” function in the Initial
Set mode. (p. 9-16)
G If F4 paper with a size other than the default F4 size (210 mm
×
330 mm) is loaded, the setting must be changed. For details, contact
your authorized Konica Service Representative.
G Do not load paper of different sizes into the same paper tray.