Konica Minolta 7115F, Инструкция по эксплуатации

Страница: 293 / 327

Troubleshooting 13
Konica 7115F/7118F 13-1
13 Troubleshooting
13.1 When Incorrect Copies Are Produced
Symptom Possible Cause Remedy
The copy is too light. The copy density is set too
light. Use the [DENSITY SET]
key [
] to select a darker
copy density (p. 4-25).
The copy paper is damp. Replace the paper.
(p. 12-1)
The copy is too dark. The copy density is set too
dark. Use the [DENSITY SET]
key [
] to select a lighter
copy density (p. 4-25).
The document was not
pressed close enough
against the Platen Glass. Position the document so
that it is pressed closely
against the Platen Glass.
(p. 4-5)
The copy is blurry. The copy paper is damp. Replace the paper.
(p. 12-1)
The document was not
pressed close enough
against the Platen Glass. Position the document so
that it is pressed closely
against the Platen Glass.
(p. 4-5)