Konica Minolta 7115F, Инструкция по эксплуатации

Страница: 294 / 327

13 Troubleshooting
13-2 Konica 7115F/7118F
There are streaks through the
copy.
There are specks throughout
the entire copy.
The Platen Glass is dirty. Wipe the glass with a soft
dry cloth. (p. 14-9)
The document pad is dirty. Clean the document pad
with a soft cloth dampened
with a mild detergent.
(p. 14-9)
The original is highly
translucent, such as diazo
photosensitive paper or
OHP transparencies. Place a blank sheet of
paper over the document.
(p. 4-6)
A double-sided document is
being copied. If a thin double-sided
document is being copied,
the information on the back
side may be reproduced in
the copy. Use the
[DENSITY SET] key [
] to
select a lighter density for
the background. (p. 4-26)
The edge of the copy is dirty. The document pad is dirty. Clean the document pad
with a soft cloth dampened
with a mild detergent.
(p. 14-9)
The selected paper size is
larger than the document
(with a zoom setting of
×
1.00).
Select a copy paper size
that is the same as the size
of the document. (p. 4-11)
Otherwise, select the
“AMS” function to enlarge
the copy to the selected
paper size. (p. 4-21)
The orientation of the
document is different from
the orientation of the copy
(with a zoom setting of
×
1.00).
Select a copy paper size
that is the same as the size
of the document.
Otherwise, select a copy
orientation that is the same
as the orientation of the
document.
The copy was reduced to a
size smaller than the copy
(with a reduced zoom ratio). Select a zoom ratio that
adjusts the copy size to the
size of the selected paper.
(p. 4-22)
Otherwise, select the
“AMS” function to reduce
the copy to the selected
paper size. (p. 4-21)
Symptom Possible Cause Remedy