Konica Minolta 7115F, Инструкция по эксплуатации

Страница: 201 / 327

Initial Set Mode – Copy Functions 9
Konica 7115F/7118F 9-31
9.5 Specifying Copy Settings (“COPY SETTING 1” &
“COPY SETTING 2” Menus)
The settings that are automatically selected when the machine is turned
off or the [AUTO RESET] key is pressed are called the “default settings”.
From the “COPY SETTING 1” menu, the default settings for various
functions can be specified.
“COPY SETTING 1” menu:
No. COPY SETTING 1 Description
1 PAPER PRIORITY This function can be used to specify the paper size or tray
that should be given priority when the “Auto” zoom setting is
selected.
• The manufacturer’s default setting is “A4 C”.
2 DENSITY PRIORITY This function can be used to set the density to “AUTO”,
“MANUAL” or “PHOTO” when the machine is turned off or
the [AUTO RESET] key is pressed.
• The manufacturer’s default setting is “AUTO”.
3 DENSITY LEVEL(A) This function can be used to set the density level of the
“AUTO” density setting to one of the three settings between
“LIGHT” and “DARK”.
• The manufacturer’s default setting is the middle level.
4 DENSITY LEVEL(M) This function can be used to set the density level of the
manual density setting to one of the five settings between
“LIGHT” and “DARK”.
• The manufacturer’s default setting is the middle level.
5 BINDING POS. This function can be used to set whether the first page of a
book to be scanned is on the left (left-bound) or on the right
(right-bound).
• The manufacturer’s default setting is “LEFT”.
6 MARGIN SETTING This function can be used to specify between 0 mm and
20 mm (in units of 1 mm) the width of the binding area
(margin) when copying documents to be bound.
• The manufacturer’s default setting is 10 mm.
7 ERASE SETTING This function can be used to specify between 5 mm and
20 mm (in units of 1 mm) the width that is erased when
making copies with the “Erase” function set to “Left”, “Top”
and “Frame”.
• The manufacturer’s default setting for the “Left”, “Top” and
“Frame” erase settings is 10 mm.