Konica Minolta 7115F, Инструкция по эксплуатации

Страница: 184 / 327

9 Initial Set Mode – Copy Functions
9-14 Konica 7115F/7118F
To specify the size of paper loaded into the 1st Tray (“TRAY1
PAPER” function)
1
Select the “PAPER SOURCE
SETUP” menu.
❍ Refer to “To select the “PAPER
SOURCE SETUP” menu” on
page 9-12.
2
Press the [2] key from the KEYPAD
to select “TRAY1 PAPER”.
3
Using the [ ] and [ ] keys, select
“PLAIN”, “OHP” or “CARD”, and
then press the [YES] key.
4
Using the [ ] and [ ] keys, select
either “AUTO” or “SIZE INPUT”, and
then press the [YES] key.
❍ If “AUTO” was selected, the
“PAPER SOURCE SETUP”
menu appears again.
❍ If “SIZE INPUT” was selected, a screen appears, allowing you to
specify the paper size.
5
Using the KEYPAD, enter the paper
length (mm), and then press the
[ENTER] key.
❍
The paper length can be set
between 140 mm and 432 mm.
However, when the length is set between 421 mm and 432 mm,
the maximum width that can be set is 279 mm.
❍ If you wish to correct the setting, press the [NO] key, and then enter
the new number.