Kongsberg Simrad FM90i, Справочное руководство

Страница: 47 / 104

922-00047001/1.1
45
Using sonar view overlays
Topics
Measuring distances, page 45
Defining an area, page 46
Placing reference cursors, page 47
Measuring distances
You can use the tape measure tool to draw a line in the sonar view and measure the distance
between two points.
Context
This button is located on the top bar.
Measures distances on the sonar view. Also allows you to place a measurement
overlay on the sonar view.
Procedure
1 Click the
Tape Measure
button.
2 Click and hold the left mouse button on your first target, then drag the mouse to your
second target.
The length and bearing between the targets is displayed dynamically.
Note
The measurement line will not remain on the display when you release the mouse button.
3 To keep the measurement line on the display, place a measurement overlay.
a Click and hold the right mouse button on your first target.
b Drag the mouse to your second target and release the mouse button.
c Move the mouse to a place on the screen where you would like to place the
overlay length and bearing label.
Operating procedures