Kongsberg Simrad FM90i, Справочное руководство

Страница: 31 / 104

922-00047001/1.1
29
Procedure
1 Double-click the FM90i icon on the Processor Unit desktop to start the software.
2 Click the
Run
button to connect to the Sonar Head.
This button is located on the top bar.
Note
If the sonar is operating, clicking the Run button stops operation and disconnects the
Sonar Head.
3 Verify that the Sonar Head connects and the sonar views update.
4 If you see an error in the
Output Messages
window, make sure that the
Sonar Head has been discovered.
a Click the
System Setup
button.
This button is located on the top bar.
Observe that the
System Setup
dialog box opens.
b Select the
Sonar Setup
tab.
c Click
Discover Sonar Heads
to search for the sonar on the network.
d If the Sonar Head is found, select it, then click
Use Discovered Head
.
A discovered Sonar Head appears in the
Online Sonar Heads
list. If the Sonar
Head does not appear, the Ethernet connection between the Processor Unit and
Sonar Head has not been established.
e Click
Close
.
Related topics
System Setup dialog box - Sonar Setup page, page 74
Run, page 82
Turning on the FM90i for normal use, page 17
Getting started