Kongsberg Simrad FM90i, Справочное руководство

Страница: 82 / 104

80
922-00047001/1.1
Tip
If the local system (FM90i Processor Unit) and the remote system shall communicate
point-to-point in a closed network, both IP addresses, as well as both Local Port and Remote
Port values must be defined.
Details
Add > >
Click this button to add the selected source in the
Select Source
list for exporting.
Note
The
Select Source
list provides the available sources of sensor information. The
availability of sources will depend on the catch sensors that are currently used with
the system.
< < Remove
Click this button to disable the exporting of the selected output in the
Ports
list.
Note
The
Ports
list displays the communication ports that are available to export data. They
can be serial COM ports or Ethernet UDP ports.
Enabled Output On Port
Check this box to enable the selected port for exporting.
Communication Settings
•
Bits per Second
Select a data speed for the serial communication. Bits per second (bps) is a measure
used to show the average rate at which data is transferred between a computer
and a data transmission system.
•
Data Bits
Select the number of data bits for the serial communication.
Note
The standard number of data bits defined for NMEA serial line communication is
8 (eight).
Simrad FM90i Reference Manual