Komptec KT-90A, Руководство пользователя

Страница: 37 / 52

Komptec GmbH. KT-90A User Manual Page 37 of 52 v1.0a; 8 May 2016
10.3. Maintenance Work
10.3.1. Checking the Oil Level
Check the oil level on the dipstick in the oil fill cap daily before operation. Clean the
dipstick, reinsert without rethreading. Oil should be between the upper and lower lines.
Avoid overfilling of the compressor when refilling the oil.
If the compressor is operated with too little or too much oil, this can cause serious damage
to the compressor.
Only use the recommended oil (section 4.3), because other oils have an adverse effect on
the service life, and can destroy the compressor.
1. Bleed the system com-
pletely of air 2. Remove oil fill cap 3. Remove dipstick, clean,
reinsert without rethread-
ing
4. Oil level must be within the
upper and lower marks. If
necessary, Refill oil. 5. Replace oil fill cap with
dipstick