Komptec KT-90A, Руководство пользователя

Страница: 34 / 52

Komptec GmbH. KT-90A User Manual Page 34 of 52 v1.0a; 8 May 2016
10. Maintenance
In the maintenance of the compressor, the following safety instructions must be observed
– to avoid life-threatening injuries to persons, damage to machinery and other damage to
property and environmental damage.
−
Cleaning, lubricating and maintenance work must be performed only by authorized ser-
vice personnel - operating instructions must be strictly observed.
−
The repairs must be performed only by qualified service personnel - the accident preven-
tion regulations must be observed.
−
The specified sequence of operations shall be followed precisely.
−
All work on the electrical equipment of the compressor may be basically carried out only
by trained electrical specialists.
−
All non-recycled fuels, lubricants and additives must be disposed of in an environmen-
tally friendly manner, following local environmental regulations.
−
Also read the chapter "General safety instructions".
10.1. Maintenance Plan
The maintenance intervals
For the first time after 25 operating
hours
Chapter Date Signature
Check function and tightness of the filling
hose valve
- -
Check the filter O-ring seal - -
Check V-belt tension - -
Oil change 9.3.3
Check tightness of all cooler and connect-
ing lines
- -
Check fastening of the cooler - -
Final pressure gauge must be located in the
unpressurized state to the “0” position
9.3.4
Tighten valve cap screws and valve pin
screws.
Daily Chapter Date Signature
Check oil level 9.3.1