Komatsu PC1250-11, Оригинальное руководство пользователя

Страница: 424 / 452

AUTO-GREASING CAUTION LAMP
When the pressurization of the grease line has a trouble, the
auto-greasing caution lamp is lit in red.
INJECTOR ACTION INDICATOR
The indicator pin moves up and down according to the pres-
sure and depressure in the grease line, and through this move-
ment, it notifies that the grease is discharged to the greasing
points. If the grease cannot be discharged correctly, the indica-
tor pin does not move even after the pressure and depressure
are given to the line. So you can find there is a trouble.
State Main causes Remedy
Auto-greasing caution lamp lights
up.
•
Operation is performed with empty
grease pail.
• Grease pail becomes deformed, fol-
lower plate does not lower, and air is
sucked in. • Replace grease pail.
•
Grease leaks from greasing piping
(piping from pump through injector).
•
Check and repair.
•
Grease leaks from injector.
•
Replace.
•
Improper pressurization of pump
•
Replace.
Injector operates but indicator
does not operate. • Injector has a trouble.
•
NLGI No. 2 or equivalent grease is
used in a cold district.
• Replace.
•
Replace grease with NLGI
No. 0 or equivalent grease
for cold district.
If any problem caused by other causes than shown in the table is found, ask your Komatsu distributor for repair.
HANDLE AUTO-GREASING SYSTEM ATTACHMENTS AND OPTIONS
6-18