manualshive.com logo in svg

Komatsu Utility SK714-5, Руководство по ремонту, Страница: 178 / 258

Поделиться
Скачать
Komatsu Utility SK714-5 Скачать руководство пользователя страница 178

30-6

SK714-5  SK815-5  SK815-5 turbo

TILTING THE CAB

1 - Completely raise the working equipment and secure

them in their safety positions.

2  - Loosen the four screws (1) and remove the foot-rest (2).

★

Only if the engine or the complete pump are to be re-
moved.

3 - Remove the engine hood.  (For details see “REMOVAL

OF THE ENGINE HOOD”).

With front door

4 - Loose screws (3), remove the bracket (4) and close the

front door.

5 - Loosen the screws (5) (two to each side) and raise the

cab as far as the safety cables allow.

6 - Insert the safety pin.

★

If the engine or pump are to be removed, proceed as
follows.

7 - Disconnect the four pipes (6) on the RH side, the two

servo-control supply-pipes (7), and the four pipes (8) on
the LH side.

★

To disconnect the pipes, remove the retainer (9),
push the pipe (6) completely inside the union (10)
and extract the pipe (6).

★

Mark the tubes to avoid exchanging them during re-
assembly.

RKSA0240

1

2

RKSA1500

3

4

RKSA0251

5

1

RKSA0261

6

8

9

6

7

10

2

REMOVAL AND INSTALLATION

CAB

Содержание SK714-5



































































































































































































































































Отзывы:

Нет отзывов