manualshive.com logo in svg

Komatsu Utility SK714-5, Руководство по ремонту, Страница: 156 / 258

Поделиться
Скачать
Komatsu Utility SK714-5 Скачать руководство пользователя страница 156

20-24

SK714-5 SK815-5  SK815-5 turbo

6 - Loosen the 4 retaining screws (11) from the plate (12)

and remove the plate.

7 - Remove the stopper (13) and seals.

★

Use a soft tool to remove.

8 - Remove the complete spool (14).

9 - Remove the retainer (15), spring (16) and shims (17)

from the spool (14).

10 - Add shims until you reach the admitted calibration va-

lue; bear in mind that 0.3 mm thickness corresponds to
a variation in pressure of about 0.6 bar. (For details, ple-
ase refer to «TECHNICAL DATA»).

Assembly

•

To assemble, perform the disassembly procedure in the
reverse order.

★

Thoroughly clean all parts.

Cleaner: Loctite 7063

Screw: 64–74 Nm

★

Press down on the stoppers (13) to ease setting
into place; tighten the retainer plate (8) until it is pro-
perly seated and adjust clearance. (For details, ple-
a s e   r e f e r   t o   « P P C   V A L V E   C L E A R A N C E
ADJUSTMENT»).

Joint: 112.8±14.7 Nm

Screws: 13.2±1.5 Nm

★

Lubricate the stoppers (13).

RKSA2390

11

12

3

RKSA2400

13

14

4

RKSA2410

14

15

16

17

1

2

3

4

TESTING AND ADJUSTMENTS

REGULATION OF MANIPULATORS’ DRIVE PRESSURE

Содержание SK714-5



































































































































































































































































Отзывы:

Нет отзывов