Koike Sanso Kogyo IK-12 NEXT, Руководство по эксплуатации

Страница: 9 / 60

IK-12 NEXT
- 5 -
1.2.6 Safety precautions for skin burns
Observe the safety precautions to prevent skin burns. Ignoring heat, spatter, and sparks during
operation could cause a fire or burned skin.
1. Do not perform cutting near flammables. (Move flammables well away from the sparks.)
2. Do not cut containers filled with flammables.
3. Do not keep lighters, matches, and other flammables nearby.
4. Flames from the torch will burn skin. Keep your body away from the torch and tip, and check the
safety before operating the switches and valves.
5.Wear the correct protectors to protect your eyes and body.
6.Correctly tighten the tip to prevent backfire.
●
When fixing a tip to the torch, tighten the nut with the two wrenches .
●
If the tip is tightened excessively, it will be heated during cutting and tightened still more, making it
difficult to remove the tip.
●
Avoid damaging the taper of the tip since this may cause backfire.
7.Check with soapsuds for any leakage of gas from the connection part of the distributor, hose, and
torch.
Never use oil or grease on the connection of the oxygen pipe to avoid backfire which may lead to
explosion.
8.Be sure to check the following when igniting:
●
Place the torch on the torch holder before igniting.
●
Always wear the required protectors (gauntlets, goggles, helmet, etc.)
●
Check for any obstacles, dangerous materials and flammables near or in the direction of cutting.
Determine the gas pressure.
●
The gas pressure must be within the appropriate range. (For the gas pressure, refer to the Cutting
Data.)
9.The torch, tip, and heat shield are heated to a very high temperature. Always wear gauntlets when
handling them. Also the surface after cutting is very hot so do not touch it even while wearing
gauntlets.
10.Never move the machine while the preheat flame is on.