Koike Sanso Kogyo IK-12 NEXT, Руководство по эксплуатации

Страница: 5 / 60

IK-12 NEXT
－
1
－
0
1 Safety information
Many accidents are caused by operation, inspection, and maintenance which disregard the basic
safety rules. Carefully read, understand, and master the safety measures and precautions
described in this instruction manual and on the machine before operating, inspecting and
maintaining the machine.
The safety messages are classified as follows for machine safety labels:
■
DANGER
Improper handling is very likely to cause death or serious injury.
■
WARNING
This word is used in a warning message and a warning label at places that could cause injury or
serious accident.
■
CAUTION
This word is used in a caution message and a caution label at places that could cause slight injury
or machine damage. This is also used as a caution for frequent dangerous actions.
■
NOTICE SIGNS
This is a sign to show machine operators and maintenance engineers items that relate directly to
damage of machines and surrounding facilities and equipment.
1.1 General machine safety precautions
Read and fully understand the following important safety information:
1.1.1 Machine safety
1. The machine casing is mainly made of aluminum alloy to reduce weight. For this reason, be careful not
to drop a heavy item on the machine, or not drop the machine when carrying it since the alloy is not
designed to withstand such impact.
2. When mounting hoses to the torch and distributor, tighten the nut with the wrench. After mounting, be
sure to check there is no gas leak with a detection liquid. If a gas leak is found, retighten the nut
firmly.
3. When fixing a tip to the torch, tighten the nut with the two wrenches. In addition, avoid damaging the
taper of the tip since this may cause backfire.
4. Never disassemble the machine other than during maintenance and inspection. Otherwise,
malfunction will result.
5. Never remodel the machine. Remodeling is very dangerous.
6. When changing the direction, make sure that the direction switch is in the neutral (stop) position, and
operate the direction switch after the machine has stopped.
7. Always turn the power off when not in use.
8. Never use the machine outdoors when the weather is wet. This will cause failure of the machine and
could cause a fatal accident by electric shock.