Kohler PW 9000DPA, Руководство пользователя

Страница: 58 / 86

4: Operation
4-12
UPS306-01-00 PowerWAVE 9000 DPA User Manual Dated 01-06-2010
5. When powering up a multi-module system ensure that ALL the modules are in the state shown above
before continuing with this procedure.
Transferring to the UPS from the Maintenance Bypass:
6. Ensure that the
BYPASS
LED is green (on all modules).
7. Open the Maintenance Bypass switch (IA1) (on all cabinets in a multi-cabinet system).
a) The LCD panels will display
MANUAL BYPASS OPEN
.
b) The
INVERTER
LED will be extinguished.
c) An audible alarm will sound.
8. Press the
RESET
button to cancel the audible alarm (on all modules).
a) The LCD display(s) will now indicate
LOAD NOT PROTECTED
.
Transferring the load to the inverter:
9. On the Control Panel (of any one module in a parallel module system):
a) Press the
UP
key once to access the menu system.
b) Use the
UP/DOWN
keys to move the cursor so that it is adjacent to
COMMANDS
and then press the
ENTER
key.
c) Use the
UP/DOWN
keys move the cursor so that it is adjacent to
LOAD TO INVERTER
and then press
the
ENTER
key.
10. The UPS system will transfer the load to Inverter (on all modules in a paralleli-module system).
a) The LCD display(s) will now indicate
LOAD PROTECTED
.
b) Check and confirm that the LED display(s) are as shown below:
LED Colour
LINE 1 Green
LINE 2 Green
BY PASS Green
INVERTER RED
BATTERY Green
LINE 1
LINE 2 BY PASS
INVERTER
BATTERY
LOAD
LED Colour
LINE 1 Green
LINE 2 Green
BY PASS Green
INVERTER RED
BATTERY Green
LINE 1
LINE 2 BY PASS
INVERTER
BATTERY
LOAD
LED Colour
LINE 1 Green
LINE 2 Green
BY PASS Off
INVERTER Green
BATTERY Green
LINE 1
LINE 2 BY PASS
INVERTER
BATTERY
LOAD