manualshive.com logo in svg

Kohler KD-150, Руководство пользователя

Поделиться
Скачать
Kohler KD-150 Скачать руководство пользователя страница 77

10-8

Style Record mode

Style Record procedure

7.

Set the tempo. Keep the SHIFT button pressed, and use
the TEMPO/VALUE controls to change the tempo.

8.

At this point, if you want to do a Realtime Recording go
on reading “Realtime Record procedure” below. Other-
wise, if you prefer to do a Step Record, jump to “Step
Record procedure” on page 10-8.

Realtime Record procedure

1.  

When still in the Main page of the Style Record mode,
press one of the E VOLUME/VALUE buttons, to select
the “R” parameter. Use these buttons, or the TEMPO/
VALUE controls, to select the “RT” (Realtime) recording
mode.

2.

Press TRK SELECT to switch to the Style Tracks page.
Here you can assign the right Program to each Style
track. (For more details, see “Style Tracks page” on
page 10-6).

3.

If you like, you can set the tempo again from this page:
just use the TEMPO/VALUE controls.

4.

Assign a Program to each track, by using the PRO-
GRAM/PERFORMANCE section. You can’t select Digi-
tal Drawbars Programs.

5.

If needed, set the Octave Transpose for each track. 

Note:

The Octave Transpose will affect only the notes coming
from the keyboard, and not from the arranger.

6.

Select the track to put in record. Its status icon will
begin flashing.

Note: When entering the Record mode, the last selected
track is already in record. When you press START/
STOP after entering the Record mode, you can immedi-
ately start recording.

If you like, you can try your part before recording:
• Set the track into mute, by pressing both correspond-
ing VOLUME/VALUE buttons; the status icon disap-
pears.
• Press START/STOP to play back the other tracks, if
already recorded, and practice on the keyboard.
• When you have finished practicing, press START/
STOP to stop the arranger, and unmute the track by
pressing both VOLUME/VALUE buttons; the track will
be in record again.

7.

While the status icon is flashing, press START/STOP to
begin recording. Depending on the “Metro” (metro-

nome) option you selected, a 1- or 2-bars precount may
play before the recording actually begins. When it
begins, play freely. The pattern will last for some mea-
sures, according to the RecLen value, then restart.
Since the recording will happen in overdub, you can add
notes on any following passage. This is very useful to
record different percussive instruments at any cycle on a
Drum or Percussion track.

Note:

 While recording, the track’s 

Keyboard Range

 (see

page 10-19) is ignored, and the track can play over the
whole keyboard range. The 

Local

 parameter (see “Local”

on page 15-4) is also automatically set to On, to allow
playing on the keyboard.

8.

When finished recording, press START/STOP to stop
the arranger. Select a different track, and start recording
the whole Chord Variation.

Note:

 You can select a different track only when the

arranger is not running.

9.

When finished recording the Chord Variation, select a
different Chord Variation or Style Element to go on
recording the whole Style.

10.

When finished recording the new Style, press WRITE or
RECORD to save it in memory. The Write page will
appear:

• To change the Style’s name: press the right A VOL-
UME/VALUE button to enter editing, and modify the
name using the UP/DOWN buttons to move the cursor,
and the DIAL to select a character. Press INSERT to
insert a character at the cursor position, or DELETE to
delete it.
• To select a different location in memory, press one of
the B VOLUME/VALUE buttons, then select a location
with these buttons or the TEMPO/VALUE controls.
Press ENTER to confirm, or one of the D (Abort) VOL-
UME/VALUE buttons to abort the save. The  “Are  you
sure?” message will appear in the display. Press ENTER
to confirm, EXIT to abort. After pressing ENTER, you
will exit from the Record mode.
If you press EXIT while in the Write page, you will go
back to the previous Style Record page, without any
change.

Step Record procedure

1.  

When still in the Main page of the Style Record mode,
press one of the E VOLUME/VALUE buttons, to select

R:RT 

Brush 2     Piano01

Perc Kit    Guitar01

*AcouBass   StrngEns2

AcouPiano2  VoxPad1

NewBossa |V1-CV1

Style name: NewBossa

To: U1-01 Bossa

Abort

Write to

Содержание KD-150




















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды