Kohler KD-150, Руководство пользователя

Страница: 170 / 307

16-1 Disk edit environment
The WRITE/DISK IN USE LED
16. DISK EDIT ENVIRONMENT
The Disk edit environment is the place where you can man-
age files. This edit environment overlaps the current operat-
ing mode (Style Play, Song Play, Backing Sequence, Song,
Program).
The KD can use three different mass storage device types:
•
Floppy Disk
• Hard Disk
• Flash Card (for future development only)
THE WRITE/DISK IN USE LED
When a disk is reading or writing data, the WRITE/DISK IN
USE indicator lights up. While in a Disk page, the “Wait”
message appears in the display; in this status you can’t select a
different Disk page (you can, however, select a different oper-
ative mode).
Warning! Never remove a floppy disk when the WRITE/DISK
IN USE LED is turned on!
Note: When loading or saving, you can obtain the maximum
speed by loading or saving into the same location as the source
data. When loading or saving into a different location, some
data restructuring is needed, and the operation becomes slower.
FLOPPY DISK HANDLING
The KD can save most of the data contained in the memory
on a 3,5” DS-DD disk (720KB capacity) or HD (1,44MB
capacity), MS-DOS®-formatted. Here are some precautions
when handling disks.
Write protection
You can protect a disk from the accidental overwriting of
data, by opening the write protect hole. To protect the disk
from overwriting, slide the protection flap so that the hole
becomes visible.
Inserting a disk
Insert the disk carefully into the disk drive, with the label fac-
ing upwards and the metal part to the front. Press it in as far
as it will go.
Note: The KD incorporates a new type of disk drive and you
cannot hear “click” when the disk is inserted into place.
Removing a disk
Before removing a disk, make sure that the disk activity indi-
cator is off. If the LED is off, remove the disk by pressing the
eject button.
Warning: Do not remove the disk if the disk activity indicator is
lit up.
Cleaning the heads
The disk drive read/write heads get dirty with use and
become less accurate. You can clean the heads with a special
cleaning disk, you can purchase from any computer or musi-
cal instrument store. Use a 3.5” DS wet type head cleaning
disk; and follow the instructions.
ALL |
|
FD SAVE OPEN CLOSE
Disk:Save |Wait
To write-protect the disk:
move the flap and open the
hole
To write-enable the disk: move
the flap to close the hole
Disk activity
indicator
Opening for
disk insertion
Eject
button
Disk activity
indicator
Opening for disk
insertion
Eject but-
ton