manualshive.com logo in svg

Kohler KD-150, Руководство пользователя

Поделиться
Скачать
Kohler KD-150 Скачать руководство пользователя страница 24

3-7

Front panel

parameter (see “Chord Recognition Mode” on
page 9-13).

UPPER

Chords are detected above the split point. You
must always play three or more notes to let the
arranger recognize a chord.

FULL (both LEDs on)

Chords are detected on the full keyboard
range. You must always play three or more
notes to let the arranger recognize a chord.
(You can use this mode even when the Split
Keyboard Mode is selected).

OFF

No chords detected. After pressing START/
STOP, only the Drum and Percussion accom-
paniment tracks can play.

d

KEYBOARD MODE section

 

These buttons define how the four Keyboard (or Realtime)
tracks are positioned on the keyboard.
SPLIT

The Lower track plays below the split point,
while the Upper 1, Upper 2 and Upper 3 tracks
play above it. By default, selecting this key-
board mode automatically selects the Lower
chord scanning mode (see “Chord Recognition
Mode” on page 9-13).

FULL UPPER

The Upper 1, Upper 2 and/or Upper 3 tracks
play on the whole keyboard range. The Lower
track does not play. By default, selecting this
keyboard mode automatically selects the Full
chord scanning mode (see “Chord Recognition
Mode” on page 9-13).

e

STYLE CHANGE

This button turns the Style Change function on or off.
ON

When you select a Performance, the Style
could change, according to which Style num-
ber is memorized onto the Performance.

OFF

When you select a Performance, the Style and
Style track settings remain unchanged. Only
Realtime (Keyboard) tracks settings are
changed.

f

PERFORM.

Press this button to use the PROGRAM/PERFORMANCE
section to select a Performance.

g

PROGRAM

Press this button to use the PROGRAM/PERFORMANCE
section to select a Program, and assign it to the selected track.

h

PROGRAM/PERFORMANCE section

 

 

Use these buttons to open the Program Select or Performance
Select window, and select a Program or a Performance. See
“Selecting a Program” on page 6-3, or “Selecting a Perfor-
mance” on page 6-2. For a list of available Programs, see
“Programs (Program Change order)” on page 17-12.

The leftmost button selects the upper or lower row of Pro-
gram or Performance banks. Press it repeatedly to select one
of the rows. (After both LEDs have turned on, press the but-
ton again to turn them off).
UPPER LED ON

Upper row of Programs or Performances
selected.

LOWER LED ON

Lower row of Programs or Performances
selected.

On the front panel, 

Program banks 

are identified by the

instrument names, while 

Performance banks 

are identified

by numbers (1-10; 0=bank 10).

A note about Program banks and names. 

Programs from

“PIANO” to “SFX” are standard Programs, the user can’t
directly modify.
Programs “USER1” and “USER2” are locations where you
can load new Programs from disk.
“USER DK” is where you can load new drum kits.
Each Program bank contains various pages, each with up to 8
Programs. You can browse them using the PAGE buttons.

Shortcut to see the original bank for a Performance or Pro-
gram.

 You can see the original bank where a Performance or

Program is contained. Just keep the SHIFT button pressed,
and press the lefmost button of the PROGRAM/PERFOR-
MANCE section. A message window will appear, showing the
name of the original bank. Release the SHIFT button to exit
the window.

Shortcut to see all pages of the selected bank.

 To cycle all

pages for a selected bank, repeatedly press the bank’s button.

i

SYNCHRO START / STOP (DELETE)

This button turns the Synchro Start and Synchro Stop func-
tions on or off. Press it repeatedly to turn the functions on or
off. The LEDs cycle in this order: START 

➛

 START+STOP 

➛

OFF.
START LED ON

When this LED is lit, just play a chord in the
chord recognition area (usually under the split
point, see “CHORD SCANNING section” on
page 3-6) to automatically start the Style run-
ning. If you like, you can turn one of the
INTROs on before starting the Style.

START+STOP LEDs ON

When both LEDs are lit, raising your hand
from the keyboard momentarily stops the Style
running. If you play a chord again, the Style
starts again.

OFF

All Synchro functions are turned off.

 This button doubles as a 

DELETE 

function for the Backing

Sequence and Song modes (see chapters 12 and 13).
It is also used to delete the selected character, during text
editing.

Содержание KD-150




















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды