manualshive.com logo in svg

Kohler KD-150, Руководство пользователя

Поделиться
Скачать
Kohler KD-150 Скачать руководство пользователя страница 187

16-18

Disk edit environment

Page 10 - Card Backup

Global Protect

When loading a “.SET” file, this parameter (if On) protects
the Global from being reprogrammed by the loaded data. All
Global parameters are therefore left unchanged.
When loading a single “.GLB” file, this parameter is ignored,
and the Global is overwritten by the loaded data.

Note:

 This parameter is saved in memory, but not on disk.

HD Protect

When on, this parameter protects the Hard Disk from writ-
ing.

Note:

 This parameter is saved in memory, but not on disk.

Factory Style Protect

When On, this parameter protects the Factory Styles (from
the “8 BEAT/16 BEAT 1” to the “TRADITIONAL” bank)
from being overwritten when loading data from disk. Fur-
thermore, you can’t access these banks when saving data.
When Off, you can load or save User Styles even into the Fac-
tory Styles banks (from “8 BEAT/16 BEAT 1” to “TRADI-
TIONAL”). This way, you can personalize your Factory Style
banks.
Please note that the Save All procedure always saves only the
USER Style banks.

Note:

 This parameter is automatically set to On when turning

the instrument off.

Note:

 If you accidentally delete some Factory Data, reload the

Backup data, contact your KOHLER dealer or service center, or
download the data from 

www.samickmusicusa.com

.

Card Protect (For future development)

Set the Protect status to On, to protect a Flash Card from
accidental writing.

Note:

 You cannot change the Protect status of ROM (Read-

Only) Flash Cards.

1.  

Insert the card in the slot on the back of the instrument.

2.

Change the Protect status. Wait a few seconds for the
Protect status to be changed.
Since this status is written to the card, the card will
remain protected or unprotected even when read on a
different KD.

PAGE 10 - CARD BACKUP

Through this page, you can back up the contents of the entire
Flash Card. This is useful for archival purposes, and to empty
the card to make room for different data.

Backup procedure

1.  

Insert the Flash Card to be backed up into the FLASH
CARD slot on the back of the instrument.

2.

Go to “Page 10 - Card Backup”.

3.

Use the F1 button to select the target device (HD or FD).

4.

Use the E-H VOLUME/VALUE buttons, or the TEMPO/
VALUE controls, to move the folder to select to the first
line of the display.

5.

Press F3 (Open) to open the selected folder. Press F4
(Close) to close the current folder.

6.

When the target “.CRD” folder is on the first line of the
display, you may press one of the A VOLUME/VALUE
buttons to enter the Text Edit mode. Move the cursor
using the DOWN/- and UP/+ buttons. Select a character
using the DIAL. Insert a character at the cursor position
by pressing the INSERT button. Delete a character at the
cursor position by pressing the DELETE button.

7.

When you have finished writing a name for the new
folder, press F2 (Save) to confirm. The “Are you sure?”
message will appear. Press ENTER to confirm, or EXIT
to abort.

Note:

 If you assign an existing name to the new “.CRD”

folder, the “Overwrite?” dialog box will appear. Press
ENTER/YES to confirm overwriting of existing data, or
EXIT/NO to abort, and repeat the folder naming.

8.

If you selected the floppy disk drive as the backup
device, insert the various disks as required by the instru-
ment., and press ENTER to continue:

If the floppy disk is not empty, KD asks if you want to
format it:

Keep SHIFT pressed, and press ENTER to format the
disk. KD tries a Fast Format, and makes a Full Format if
the former is not possible.

9.

During the Backup, the “Working…” message will
appear in the display, showing you the operation’s
progress.

Since the backup data is compressed, it is not possible to
know how many disks you will need in advance. When
finished, label the disks with progressive numbers, and
keep them in a safe place.

Warning:

 If you remove the card during the Backup, the

operation is aborted.

   NEW_NAME.CRD      |

   !123.SET

   !456.SET          |

HD  SELECT OPEN  CLOSE

Disk:Card Backup

Insert 1.4MB FD #1

 and press Enter

 Disk not empty!

Sh+Enter to format

    Working...

        0%

Содержание KD-150




















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды