manualshive.com logo in svg

Kohler KD-150, Руководство пользователя

Поделиться
Скачать
Kohler KD-150 Скачать руководство пользователя страница 142

14-9

Program operating mode

Page 6 - Pitch EG

Intensity (AMS1/2 Intensity)

These parameters specify the depth and direction of the effect
applied by “AMS1”. With a setting of 0, the levels specified by
“Start/Attack/Decay/Release Level” will be used.
For example if “AMS1” is After Touch, pressing the keys to
turn it on will change the “Level” parameters of the Pitch EG.
As the absolute value of “Intensity” is increased, the pitch EG
levels will change more greatly when the key pressure is
released. The direction of the change is specified by “Start
Level Swing” and “Attack Level Swing”. When the key pres-
sure is released, the pitch EG levels will return to their own
settings.
If “AMS1” is set to Velocity, increasing the absolute value of
“Intensity” will produce increasingly wider change in pitch
EG levels for strongly-played notes. The direction of the
change is specified by “Start Level Swing” and “Attack Level
Swing”. As you play more softly, the pitch change will draw
closer to the pitch EG levels.
-99…+99

Parameter value.

Start Level Swing

This parameter specifies the direction of change in “Start
Level” caused by “AMS1/2”. If “Intensity” is a positive (+)
value, a setting of + will raise the EG level, and a setting of –
will decrease it. With a setting of 0 there will be no change.

Attack Level Swing

This parameter specifies the direction of change in “Attack
Level” caused by “AMS1/2”. If “Intensity” is a positive (+)
value, a setting of + will raise the EG level, and a setting of –
will decrease it. With a setting of 0 there will be no change.

Pitch EG ‘Time’ modulation

AMS(T) (Alternate Modulation Source)

This parameter selects the source that will control the “Time”
parameters of the pitch EG (see “AMS (Alternate Modulation
Source) list” on page 14-21).

Intensity (AMS(T) Intensity)

This parameter specifies the depth and direction of the effect
that “AMS” will have on the “Time” parameters. With a set-
ting of 0, the pitch EG times will be just as specified by the
“Attack/Decay/Release Time” settings.
The alternate modulation value at the moment that the EG
reaches each point will determine the actual value of the EG
time that comes next.
For example, the decay time will be determined by the alter-
nate modulation value at the moment that the attack level is
reached.
When this parameter is set to values of 16, 33, 49, 66, 82, or
99, the specified EG times will speed up as much as 2, 4, 8, 16,
32, or 64 times respectively (or slowed down to 1/2, 1/4, 1/8,
1/16, 1/32, or 1/64 of the original time).
For example if “AMS” is set to Velocity, increasing the abso-
lute value of “Intensity” will allow strongly-played notes to
increase the changes in pitch EG “Time” values. The direc-
tion of the change is specified by “Attack Time Swing” and
“Decay Time Swing”. As you play more softly, the pitch EG
times will more closely approach the actual settings of the
pitch EG.
-99…+99

Parameter value.

Attack Time Swing

This parameter specifies the direction in which “AMS” will
affect the “Attack Time” parameter. With positive (+) values
of “Intensity”, a setting of + will cause the time to be length-
ened, and a setting of – will cause the time to be shortened.
With a setting of 0 there will be no change.

Decay Time Swing

Specify the direction in which “AMS” will affect the “Decay
Time”. With positive (+) values of “Intensity”, a setting of +
will cause the time to be lengthened, and a setting of – will
cause the time to be shortened. With a setting of 0 there will
be no change.

Pitch EG changes (Time) (AMS = Velocity, Intensity = positive (+) value)

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

A note played softly with Attack 
Time Swing set to + and 
Decay Time Swing set to +

A note played strongly with 
Attack Time Swing set to + and 
Decay Time Swing set to +

A note played strongly with 
Attack Time Swing set to – and 
Decay Time Swing set to –

Содержание KD-150




















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды