Koden MDC-7006, Руководство по установке

Страница: 70 / 160

Chapter 4 Setup after installation MDC-7000/7900 Series
4-10 0092669002-07
4.1.11 LOGO
This radar can display your favorite picture or characters at wait or standby mode.
It is necessary to load data as
“logo.bmp” file beforehand to let you display this.
How to make and load the data file
(1) Edit a letter or picture in 256 colors of bitmap using PC. Size is up to 512x384 pixels.
The black color is not displayed as a transparent color on the screen.
(2) Save it as logo.bmp file to an SD memory card.
(3) Insert SD memory card in the upper card reader on the rear of the Display unit.
(4) Press MENU key to display
“Menu”.
Select [MAINTENANCE] => [STARTUP] => [LOGO] => [LOAD] => [GO], and press ENT key.
(5) 5 sec. later, remove SD memory card from the card reader.
(6) Select [MAINTENANCE] => [STARTUP] => [LOGO] => [LOGO] => select [WAIT] or [STANDBY]
And press ENT key.
WAIT: Logo is displayed during countdown time.
STANDBY: Logo is displayed during standby mode.
4.1.12 MOTOR HIGH SPEED
Set up when antenna high speed rotation is used.
KODEN
High speed rotation is not available in OFF.
(1) Press MENU key to display
“Menu”.
Select [MAINTENANCE] => [STARTUP] => [MOTOR HIGH SPEED].
Select high speed rotation range, then press ENT key.
For example, when 6NM is selected and press ENT key.
High speed rotation in 0.0625 to 6NM range
Low speed (normal) rotation in 8 NM or up.