Koden MDC-7006, Руководство по установке

Страница: 92 / 160

Chapter 4 Setup after installation MDC-7000/7900 Series
4-32 0092669002-07
Restore setup data from the internal memory:
(1) Press MENU key to display
“Menu”.
Select [MAINTENANCE] => [BACKUP] => [SETUP LOAD] => [GO] and press ENT key.
4.5.2 External save of setup and map data (Cannot be performed while
transmitting)
To save setup and map data externally, this information can be later used to restore after a possible
malfunction.
The external memory uses an SD memory card.
CAUTION: Please do not use the SD memory card which is loaded with software program files.
Save setup and map data to SD card:
(1) Insert SD memory card in the upper card reader on the rear of the Display unit.
(2) Press MENU key to display
“Menu”.
Select [MAINTENANCE] => [BACKUP] => [SD CARD] => select [SETUP SAVE], [MARK SAVE],
[TGT TRACK SAVE] or [OWN TRACK SAVE] => [GO], and press ENT key.
When SD memory card not inserted, [SD CARD] menu is shaded menu and cannot be operated.
Restore setup and map data from SD card:
(1) Insert SD card that was used to store settings in above procedure in the upper card reader on the
rear of the Display unit.
(2) Press MENU key to display
“Menu”.
Select [MAINTENANCE] => [BACKUP] => [SD CARD] => select [SETUP LOAD], [MARK LOAD],
[TGT TRACK LOAD] or [OWN TRACK LOAD] => [GO], and press ENT key.
When SD memory card not inserted or no data found on the card, [SD CARD] menu is shaded
menu and cannot be operated.
4.5.3 Parameter reset
Use this function as means to return the radar to its default settings as it was at first power on.
(1) Press MENU key to display
“Menu”.
Select [MAINTENANCE] => [BACKUP] => [PARAMETER RESET] => [GO], and press ENT key.
4.5.4 MAP, Target Track and Past Position reset
Use this function as means to delete all the map, target track and past position data from radar internal
memory.
(1) Press MENU key to display
“Menu”.
Select [MAINTENANCE] => [BACKUP] => [MAP/PAST RESET] => [GO], and press ENT key.