background image

RT-550 Ma

r

ine Radio

25/1 Watt 

VHF/FM

OPERATOR WARNING

Navicom requires the radio operator to meet the requirements for Radio
Frequency Exposure. Unauthorized changes or modifications to this 
equipment may void compliance with ETSI Rule. Any changes or 
modification must approved in writing by Navicom. 

This equipment has been tested and licensed to comply with the limits for Class 
D Digital Marine Devices. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.This equipment
can generate or radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio
communications and human body. Never transmit before you make sure the 
antenna is properly located.

This device is only an aid to navigation. Its performance can be affected by many
factors including equipment failure or defects, environmental condition and
improper handling or use. It is the user's responsibility to exercise common
prudence and navigational judgement, and this device should not be relied upon
as a substitute for such prudence and judgement. Your Navicom VHF radio
generates and radiates radio frequency (RF) electromagnetic energy (EME). This
equipment must be installed and operated in accordance with the instructions
contained in this handbook. Failure to do so can result in personal injury and/or
product malfunction.

Navicom RT-550 

NAVICOM 

Confl

an

s

 - Z.A. des Boutries, 78700 Conflans Ste Honorine - Tél : 01 39 72 19 90

    Fax : 01 70 72 17 19

NAVICOM 

Qu

i

mp

e

r

 - 3, rue J. Cugnot, Z.A.C du Petit Guelen, 29000 Quimper - Tél : 02.98.94.64.70

Fax : 02.98.94.69.71

Содержание RT-550






















Отзывы: