NAVICOM RT-550, Руководство пользователя

Страница: 19 / 21

6.9.3 ENTER YOUR ATIS MMSI
This is a once-only operation.
You must enter your ATIS MMSI first then you can access the ATIS
functions.
1 Select DSC SETUP then ATIS MMSI and press the CH knob. If an
existing MMSI is stored, the values appear.
2 If the MMSI is blank, a dashes line appear, except for the initial ’9’
Enter ATIS MMSI along the dashed line. Press the
CH knob to
confirm each correct entry to move to the next digit.
If your make an error, press –until < appears, then press the
CH
knob to backup and correct the entry.
3
4
5
Hold the CH knob to store your ATIS MMSI.
Enter your ATIS MMSI again as a password check, hold the CH
knob to permanently store the your ATIS MMSI and return to the
menu.
You can view your stored ATIS MMSI at anytime by selecting ATIS
MMSI
in the DSC SETUP menu.
6.9.4 ATIS ENABLE
When ATIS is enabled, the following occurs:
> DSC function are disabled.
> DUAL watch, Tri Watch and scan functions are disabled.
> The following international channels are limited to 1 watt output power:
6,8,10,11,12,13,14,15,17,71,72,74,75,76,77(
and
31, if enabled)
To enable/disable ATIS:
1
Select DSC SETUP, then ATIS ENABLE, Press the CH knob to
displays ATIS ENABLE ON/OFF.
2 Select ON for turn on ATIS function.
3 press the CH knob to confirm your choice and return to the menu.
6.9.5 DSC ENABLE
To temporary turn off the DSC function, such as sailing to inland water
or no DSC region.
1
33 34
2
3
Select DSC SETUP, then DSC ENABLE, Press the CH knob to
displays DSC ENABLE ON/OFF.
Select OFF for turn off DSC function.
press the
CH knob to confirm your choice and return to the menu.
6.9.6 POS REPLY
1
2
You can set the radio to respond the Position Request. In on of three ways,
automatic, manual, off.
Select DSC SETUP, then POS REPLY. Then press the
CH knob, the
MANUAL, AUTO, OFF appear on the screen.
Select your response and press the
CH knob to confirm and return to the
menu manual,
6.10 RESET
This feature resets every setting to the factory defaults, except USER
MMSI and GROUP MMSI,ATIS MMSI.
1
2 Select RESET, press CH key, the radios asks for confirmation
Select yes, press CH key to reset the radio and return to the
menu.
EILEEN
053421608
EDIT
>DELETE DELETEGROUP
EILEEN
>YES
NO
DSC SETUP
ATIS ENABLE
DSC ENABLE
>POS REPLAY
POS REPLY
> MANUAL
AUTO
OFF
GROUP SETUP
MANUAL NEW
> FRIENDS
CHANG
DSC SETUP
ATIS MMSI
ATIS ENABLE
>DSC ENABLE
DSC ENABLE
>ON
OFF
RESET
ARE YOU SURE
>YES
NO
MENU SELECT
RADIO SETUP
DSC SETUP
> RESET MENU SELECT
RADIO SETUP
DSC SETUP
> RESET
INPUT ATIS
MMSI
9 - - - - - - - - - ATIS MMSI
INPUT AGAIN
9 - - - - - - - - - ATIS MMSI
9100000053
>STORE
CANCEL
DSC SETUP
GROUP SETUP
ATIS MMSI
> ATIS ENABLE
ATIS ENABLE
>ON
OFF
Navicom RT-550 Navicom RT-550