Koden MDC-5204, Руководство по установке

Страница: 88 / 182

Chapter 4 Setup after installation MDC-5200/5500 Series
4-18 0092655002-03
4.2.3.3 How to input the heading value by manual
The heading data can be set by manual for the purpose of an examination or repair.
Setting can be performed with pressing MENU key as follows:
(1) [MAINTENANCE] => [I/O] => [HDG] => [HDG] => [MAN], and press ENT key.
(2) [MAINTENANCE] => [I/O] => [HDG] => [MAN] => [VALUE] will show the current setting of the input
value by highlighting the last digit value by the trackball/joystick.
(3) Move the trackball/joystick up or down to set the value. Press ENT key to save the set result.
Setting value: 0.0 to 359.9°
Note: The manual input data is displayed with yellow color.
4.2.3.4 Compensation of angle of ship
’s bearing
When there is any constant error in input ship
’s bearing, it can be used after compensated as follows:
(1) [MAINTENANCE] => [I/O] => [HDG] => [OFFSET] => [VALUE] will show the current setting of the
input value by highlighting the last digit value by the trackball/joystick.
(2) Move the trackball/joystick up or down to set the value. Press ENT key to save the set result.
Setting value: 0.0 to 359.9°
Example: OFFSET value: 10.0°
230.5
°
240.5
°