Koden MDC-5204, Руководство по установке

Страница: 59 / 182

MDC-5200/5500 Series Chapter 3 Installation method
0092655002-03 3-35
3.3.2.4 Flush mounting of MRO-108
Preparation:
(1) Cut an opening with the size as shown in Figure 3.16 on the side for mounting a Display unit on the
panel.
(2) Mark the place of holes for mounting.
(4mm screw for 4holes)
(1
5
/3
2
)
12
(5
3
/6
4
)
128
(4
5
/6
4
)
122
(15/32)
12 (12 33/64) 318
(15/32)
12
(13 15/32)
342
(3
5
5
/6
4
)
98
(13 45/64)
348
Unit : mm(inch)
Installation:
(1) Remove corner guard caps of four corners of the Operation panel enclosure.
(2) Insert the Operation panel and its connecting cable into the opening and adjust the Operation
panel parallel to the mounting face (Figure 3.17).
(3) Secure the Operation panel to the panel with 4 mm tapping screw (4 places).
(4) Return corner guard caps removed in (1) to the original places.
Figure 3.16 Diagram of processing holes for mounting an Operation panel
Figure 3.17 Flush Mounting the Operation unit
Note) Panel thickness: 10 mm (max)
Corner guard cap
(4 places)
M4 screw
(4 places)
Operation unit