595-526-E
2017-06-09
INSTRUCTION FOR CHANGING BELT ON FURLEX
ELECTRIC 200E-400E
Belt replacing kit Furlex 200E 539-633-01
Belt replacing kit Furlex 300E 539-651-01
Belt replacing kit Furlex 400E 539-776-01
1. Disconnect power
Make sure that power is disconnected before disassembling any parts.
2. Remove cover on port side
Use a torx screwdriver to loosen the screws. Take care not to damage the housing, a sharp knife
can be used to cut the sealant before the cover is removed.
3. Relieve belt tension
The motor or one of the motors has oblong mounting holes. Use a torx T30 screwdriver to loosen
the four screws slightly holding this motor until it can be moved. Push the motor to its forward
position and remove the belt by pulling it off the belt wheel(s) which does not have a flange.
FLX 200/300E
FLX400E
