Koden MDC-5204, Руководство по установке

Страница: 83 / 182

MDC-5200/5500 Series Chapter 4 Setup after installation
0092655002-03 4-13
4.1.12 MOTOR HIGH SPEED
Set up when antenna high speed rotation is used.
4.1.13 MOUSE SPEED
This menu sets the operation speed of the USB Mouse/Trackball.
(1) Press MENU
key to display “Menu”.
Select [MAINTENANCE] => [STARTUP] => [MOUSE SPEED] => select [FAST], [MEDIUM] or
[SLOW], and press ENT key.
Setting value: FAST, MEDIUM, SLOW
4.1.14 TX HOUR DISP
This radar can display the total transmitting time of the radar at wait or standby mode.
(1) Press MENU
key to display “Menu”.
Select [MAINTENANCE] => [STARTUP] => [TX HOUR DISP] => select [WAIT] or [STANDBY], and
press ENT key.
WAIT: TX HOUR is displayed during countdown time.
STANDBY: TX HOUR is displayed during standby mode.
High speed rotation is not available in OFF.
(1) Press MENU
key to display “Menu”.
Select [MAINTENANCE] => [STARTUP] => [MOTOR HIGH SPEED].
Select high speed rotation range, then press ENT key.
For example, when 6NM is selected and press ENT key.
High speed rotation in 0.0625 to 6NM range
Low speed (normal) rotation in 8 NM or up.
Note: This menu cannot perform while transmitting.