Koden MDC-5204, Руководство по установке

Страница: 105 / 182

MDC-5200/5500 Series Chapter 4 Setup after installation
0092655002-03 4-35
4.5.2 External save of setup and map data
To save setup and map data externally, this information can be later used to restore after a possible
malfunction.
The external memory uses an SD memory card.
CAUTION: Please do not use the SD momory card which is loaded with software program files.
Save setup and map data to SD card:
(1) Insert SD memory card in the card reader on front panel.
(2) Press MENU key to display
“Menu”.
Select [MAINTENANCE] => [BACKUP] => [SD CARD] => select [SETUP SAVE], [MARK SAVE],
[TGT TRACK SAVE] or [OWN TRACK SAVE] => [GO], and press ENT key.
When SD memory card not inserted, [SD CARD] menu is shaded menu and cannot be operated.
Restore setup and map data from SD card:
(1) Insert SD card that was used to store settings in above procedure in the card reader on front
panel.
(2) Press MENU key to display
“Menu”.
Select [MAINTENANCE] => [BACKUP] => [SD CARD] => select [SETUP LOAD], [MARK LOAD],
[TGT TRACK LOAD] or [OWN TRACK LOAD] => [GO], and press ENT key.
When SD memory card not inserted or no data found on the card, [SD CARD] menu is shaded
menu and cannot be operated.
CAUTION: Put the cover firmly after the SD card Insert /Remove. Water protection of the Display
unit is not guaranteed when the card reader cover is removed.
4.5.3 Parameter reset
Use this function as means to return the radar to its default settings as it was at first power on.
(1) Press MENU key to display
“Menu”.
Select [MAINTENANCE] => [BACKUP] => [PARAMETER RESET] => [GO], and press ENT key.
4.5.4 MAP, Target Track and Past Position reset
Use this function as means to delete all the map, target track and past position data from radar internal
memory.
(1) Press MENU key to display
“Menu”.
Select [MAINTENANCE] => [BACKUP] => [MAP/PAST RESET] => [GO], and press ENT key.