Kodak DCS 465, Руководство пользователя

Страница: 85 / 398

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preparing for Use with Mac
G
4-35
B. Follow directions in the Photoshop manual regarding placement
of plug-in modules. For example, with Photoshop version 2.5 and
3.0, drag the KODAK DCS 465 and any and all DCS465.BIN and
“.cal” files into the P
LUG
-
INS
folder created when you installed this
version of Photoshop (or into another folder you have designated
with P
REFERENCES
to hold plug-in modules). For Photoshop 2.5, be
certain that the files are not placed within another folder inside
the P
LUG
-
INS
folder. Wait while the files are copied.
7. Eject the KODAK DCS 465 D
RIVER
disk by dragging its icon to the
T
RASH
icon.
8. Store the KODAK DCS 465 D
RIVER
disk for possible future use.
9. Place the diskette labeled “KODAK DCS 465 Calibration (CAL) File:
Macintosh” into the internal drive of your computer.
10. Copy the calibration file onto your hard disk into a location specified
in either part A or part B of step 6 above. The filename of your cali-
bration file is your camera back serial number followed by a “.cal”
suffix. For example, if the serial number of your camera back is 465-
1006, the calibration filename would be 465-1006.cal.
NOTE: You should ensure that the gamma for your monitor is calibrated properly
per instructions accompanying Adobe Photoshop; if you do not, images may be
consistently too light or too dark.