Kodak DCS 465, Руководство пользователя

Страница: 339 / 398

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reference — KODAK Drivers for TWAIN-Compliant PC Applications
G
11-33
“DCS Hardware Error” A problem with the
hardware has been
detected. Verify that all SCSI connections
are correct (if necessary turn off
all equipment to alter the
connections), make sure the
camera back has a unique SCSI
ID, and try again.
“Disk has been recovered
successfully.” You initiated a disk
recovery by clicking
Recover Disk in the
Control Panel. It was
completed successfully. No action is required.
“Do you want to delete
ALL images in this
folder?” You are about to delete
all images in the archive
folder on your PC hard
disk (not only the images
in the image window). Make the appropriate choice.
“Do you want to delete
ALL images on the
camera?” You are about to delete
all images on the
PCMCIA card in the
camera back (not only the
images in the image
window). Make the appropriate choice.
“Do you want to delete
these image(s)?” You are about to delete all
selected images. (The
selection may include
images not currently
appearing in the image
window). Make the appropriate choice.
Message Possible Cause Suggested Solution