Kodak DCS 465, Руководство пользователя

Страница: 348 / 398

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11-42

Reference — KODAK Drivers for TWAIN-Compliant PC Applications
G
You are experiencing
erratic camera back
behavior or unusual
characters appear on the
camera back liquid crystal
display (LCD). You know
the battery is charged. The firmware in the
camera back has
become corrupted. Update camera back firmware;
if necessary use the control key
to access the driver Control
Panel as described in this
chapter.
All acquired images have
a consistent defect. There is dirt or dust on
the imager. Clean the imager as described
in “Cleaning the Imager” in
chapter 9.
Acquired images have
random defects, or there
is other noise in the
image. The ISO setting is not
supported. Take the picture again with a
supported ISO setting.
Trouble Possible Cause Suggested Solution
You are using a SCSI
cable longer than those
supplied with the DCS
465 Camera Back. Use only the supplied or
specified cables.
The exposure time is too
long. Avoid long exposures.
Occasionally exposures of more
than 1/2 second can produce
noise in the image. (You cannot
take exposures of more than
three seconds.)
The PC crashes when the
camera back is attached. There is a SCSI ID
conflict. Reset the SCSI ID on the camera
back as described in chapter 5.