Kodak DCS 465, Руководство пользователя

Страница: 334 / 398

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11-28

Reference — KODAK Drivers for TWAIN-Compliant PC Applications
G
“ASPI for Windows does
not support this mode.” The ASPI manager does
not support the current
mode setting. This error
may occur when
Windows is running in
Real Mode. Run Windows in Enhanced
mode.
“ASPI for Windows has
not been initialized.” A problem has occurred
with your software ASPI
manager for Windows. Install, or reinstall, the ASPI
manager for Windows. This
software, which is not available
from Kodak, should be provided
with your ASPI Windows host
adapter card.
“Calibration file (...) is
missing.” The driver does not find
the calibration file for the
camera back used to take
this image. You will not be able to display
the thumbnail or preview for this
image, nor will you be able to
acquire this image, unless you
have the calibration file for the
camera back used to take this
image. Reinstall it using the
“KODAK ... Calibration ...
Format” diskette. If this does not
solve the problem and if your
diskette does not have a .CAL file
on it, contact Kodak.
“Cannot find file.” Your are trying to update
camera back firmware,
but the BIN file is
missing. Reinstall the driver software and
try again.
“Cannot find filename.” You are trying to open an
archive file that the driver
cannot locate. Try another drive, another
directory, or another file.
Message Possible Cause Suggested Solution