Kodak DCS 465, Руководство пользователя

Страница: 78 / 398

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-28

Preparing for Use with Mac
G
A. If there is an external SCSI terminator on an otherwise empty SCSI
connector on the last device, remove it.
B. If there is an external SCSI terminator between the end of a cable
and a SCSI connector on a device, remove the terminator, and
then reconnect the cable. (Later, if you remove the DCS 465
Camera Back cable from your Macintosh computer, remember to
replace this terminator.)
NOTE: If you have a Macintosh IIfx computer, you must use the appro-
priate SCSI terminator for that computer system (not supplied with the
DCS 465 Camera Back).
5. Select the SCSI cable with the 50-pin connector at one end and the
25-pin connector at the other end.
IMPORTANT: Use only the cable supplied with the DCS 465 Camera Back;
do not use a substitute cable.
25-pin Connector 50-pin Connector