Kodak DCS 465, Руководство пользователя

Страница: 299 / 398

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software
G
10-41
“The PCMCIA disk in the
camera back is NOT a
DOS Disk. If you want to
use this disk with the
camera back press the
Control Panel button and
then the Format Disk
button. FORMATTING
WILL PERMANENTLY
ERASE THE DISK.” The camera back
requires that a PCMCIA
card be DOS formatted. Use the Format Disk button on
the Control Panel of the driver
image window to format the
PCMCIA card.
If a second PCMCIA card that is
known to be DOS formatted is
available, replace the current
PCMCIA card with the second
card.
“There is no Last Image
and no Images on the
DCS 465.” You are trying to acquire
an image and there are
no images on the hard
disk — if present — or
in DRAM if using a
camera back without a
hard disk. Take a picture(s) and try again, or
work with images from an
archive folder.
“This driver is not
compatible with the
camera back. Please get a
newer Driver.” The driver you are using
is outdated and will not
work with the current
version of the DCS 465
Camera Back. Install the newest driver and try
again. Refer to the appendix
“Updating Your Kodak Software
Driver” for more information.
“This Driver is not
compatible with this
image. Please get a newer
driver.” The driver you are using
is outdated and will not
work with the current
image. Install the newest driver and try
again. Refer to the appendix
“Updating Your Kodak Software
Driver” for more information.
“This Driver will not work
on a Macintosh with a
68000 processor.” The driver will not work
on older Macintosh
computers. You will not be able to use the
driver on this computer; run the
driver on a supported computer.
Refer to chapter 1 for additional
information.
Message Possible Cause Suggested Solution