manualshive.com logo in svg

Kodak DCS 465, Руководство пользователя

Поделиться
Скачать
Kodak DCS 465 Скачать руководство пользователя страница 275

.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software

G

10-17

service center, since new versions of the file that you may
obtain can be copied to the camera back with this com-
mand. It also allows you to replace the firmware in the
camera back with the same version if the firmware in the
camera back is acting erratically.

If you are working with a camera back that does not cur-
rently have a PCMCIA card installed, updating camera back
firmware deletes the image in camera back DRAM if one is
present.

After clicking this button, if you see a message asking you to
use the AC battery charger/adapter and to wait for several
minutes, follow these instructions and wait (to allow the
battery to charge) before clicking this button again.

IMPORTANT: If you obtain an updated copy of the BIN file, keep
only the most current version installed as described in chapter 4.
This will ensure that the current BIN file is used should you update
the camera back firmware.

F

IRMWARE

 V

ERSION

Displays the version of the firmware (control program-

ming) in the camera back currently attached to the com-
puter.

NOTE: This firmware version may be different from the firmware
version displayed in an information box for an individual image.
The version in the control panel is the version of the camera back
currently connected to the computer. If a camera back with
different firmware was used to produce an image, then a different
firmware version will appear in the information box for that image.

D

RIVER

 V

ERSION

Displays the version of the software driver currently in use.

Содержание DCS 465















































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды