Kodak DCS 465, Руководство пользователя

Страница: 297 / 398

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software
G
10-39
The SCSI cable is not
connected properly. Verify that the SCSI cable is
connected properly between the
computer and the DCS 465
Camera Back. If not, turn the
computer off and disconnect the
AC adapter, reconnect the cable,
and try again.
The DCS 465 Camera
Back SCSI ID is set
improperly. Reset the DCS 465 Camera Back
SCSI ID so that it is different from
other devices connected to the
computer. To do so, turn off the
computer then other SCSI
devices. Reset the DCS 465
Camera Back SCSI ID. Restart.
(If your Macintosh computer has
a CD-ROM drive, be certain that
you avoid its number — often
number 3.)
continued
“The camera back was
not found. Try the
following.

Check all cables

Check for SCSI ID
conflict

Check for a dead
battery.

Switch to an archive
folder.”
Message Possible Cause Suggested Solution