Kodak DCS 465, Руководство пользователя

Страница: 233 / 398

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reference — DCS 465 Camera Back
G
9-21
Images are stored on the PCMCIA card as you take them. The camera
back will not operate once the PCMCIA card is full. When full, you will
need to do one or more of the following.

Attach the DCS 465 Camera Back to the computer, and use the
supplied software driver to delete images from the PCMCIA card (after
acquiring them from the DCS 465 Camera Back if desired).

Remove the full PCMCIA card and insert another PCMCIA card with
space available for additional images.
Using the DCS 465 Camera Back with a
PCMCIA Card While Connected to a Computer
You can use the DCS 465 Camera Back while it is connected directly to a
computer, for example in a studio setting. Connections between the two
devices are made with the supplied SCSI cable, as described in chapters 4
(Macintosh) or 5 (PC).
The images are automatically and instantly available via the driver image
window for moving to the computer. They are displayed in the driver
window as soon as they are made, allowing you to determine quickly if
the current image is acceptable or not.
Using the DCS 465 Camera Back without a
PCMCIA Card While Connected to a Computer
You can use the DCS 465 Camera Back without a PCMCIA card only if
you are connected to a computer and running the supplied software
driver. In this configuration, you can take a picture, and that single image
will appear in the driver image window. You can then acquire the image,
or move or copy the image to your computer hard disk.
As you take each subsequent picture, it replaces the single image in the
dynamic random access memory in the DCS 465 Camera Back and in the