28
8. Care and maintenance
For all work on the Universal Belt Grinding Unit, the locally applicable
safety and accident prevention regulations, as well as instructions in the
“Safety” and “Important notes” section of the operating instructions
must be observed.
Use only original replacement and wear parts. If parts are purchased from
external suppliers, it cannot be guaranteed that they will be constructed
and manufactured to withstand the stresses and provide the required
level of safety.
CAUTION
8.1 Cleaning
Clean the Universal Belt Grinding Unit after each grinding operation to prevent grinding sludge
from drying, hence making it harder to remove.
After cleaning, lightly grease the Universal Belt Grinding Unit with non-corrosive oil (also refer to
lubrication schedule in Chapter 8.2).
8.2 Lubrication schedule and lubricant table
Lubricating activity
Interval
OEST
SHELL
EXXON
Mobil
DEA
Lubricate the threads of
star knobs and clamping
levers
4 weeks
Mehr-
zweckfett
L 2
Gadus S2
V100 2
Mobilith
SHC 100
Dolon E2
Grease machine parts after
cleaning
after each
grinding
operation
Paraffinum
Perliquidum
16 L
Shell
Risella 917
Marcol 82
Merkur
Weißöl
Pharma 40
