23
Figure 7-6
Clamping the cutter knife onto the
grinding plate
Figure 7-7
Turning the hand wheel to last lock-
ing position
7.2.4 Clamping the cutter knife
For clamping the knife (7-6/1), swivel back the
grinding plate (7-6/2) along with the mounted
locking lever (7-5/1).
The knife (7-6/1) is clamped onto the grinding
plate (7-6/2) by inserting the knife base in the
knife holder of the grinding plate. The knife is
locked in position with a counter-clockwise rota-
tion of the grinder (7-6/3).
Once the knife is clamped, swivel the complete
unit forward again.
This can result in serious cut injuries.
Wear protective gloves.
CAUTION
7.2.5 Grinding the cutter knife
Turn the hand wheel (7-7/1) counter-clockwise
until the lock lever (7-7/2) engages in the first
locking position of the locking disc (7-7/3).
NOTICE
Press with the thumb on the locking lever
(7-7/2) to move to the first locking position.
Turn the hand wheel (7-7/1) counter-clock-
wise with the remaining four fingers.
Tighten the star knob (7-7/4) to be able to
move the locking disk.
7. Operation
2
3
1
4
3
2
1
