7
1.3 Figure and item numbers in the operating instructions
If a component of the machine that is shown in a figure is described in the text, it is followed by a
figure or item number in brackets.
Example: (7-2/1) denotes figure number 7-2, item 1.
Place the function disk (7-2/1) on the locating bolt (7-2/2).
This can be done in two different ways:
For linear cutter knives, the rotation of the function disk is
prevented by a contour (7-2/3). The untoothed region is
then facing in the direction of the operator.
Insert the contour (7-2/3) in the groove (7-2/4).
1. Important notes
3
1
2
4
Figure 7-2
Inserting the function disk
